How to disassemble the extruder head(1)

   Only when you understand the correct use of the puffing machine, the equipment can be operated to the maximum extent when the equipment is operated strictly. The following explains the correct use of the puffing machine::

Remove the components such as the machine head, movement, and screw before the operation, carefully clean the scale and oil on the movement and the screw, then dry and reinstall. Start the operation for 1 minute - 2 minutes, slowly add the raw materials. At the material inlet, when about one ring of raw material can be filled into the ring groove of the screw shaft head, the feeding is stopped, and the friction preheating is performed. The temperature of the standby head rises, the pressure in the machine cavity increases, and the nozzle starts to spit and then feeds. The normal temperature and pressure have not been reached in the cavity, and the amount of feed should be gradually increased gradually.